Hyundai HYSG150, User Manual, Page: 14 / 28

5.4.2. Mounting the throttle lever.
5.4.2.1. Lift the throttle lever assembly to the right hand inside (viewed from
operators position) of the handlebar. Then using the 2 x M6 hex locknuts,
2 x M6 spring washers and 2 x M6 x 45mm bolts, bolt the throttle cable
lever assembly to the handlebars.
6. STARTING THE ENGINE - OPERATING MACHINE
6.1. Starting the engine.
6.1.1. Turn the engine switch (1) to the ON position.
6.2.1. Check that there is sufficient fuel in the tank.
6.2.2. You should fill the tank with enough petrol to last for your working session. If
you intend fill the petrol tank make sure that you leave a gap to allow for fuel
expansion. Maximum fuel tank capacity from an empty tank is 6.5L
6.3. Check oil level.
6.3.1. You must make sure that the oil is full up to the level of the threads of the oil
filler cap as shown. Maximum oil from an empty oil tank is 1.1 L
6.4. Fuel valve.
6.4.1. Open the fuel valve by moving
the lever all the way to the right.
6.5. Choke control.
6.5.1. When starting the engine cold or
partially warm, place the lever
completely or partly to the left.
6.5.2. Move the lever back all the way
right once the engine starts.
6.5.3. When the engine is cold, it may be best to move the lever back in several
stages. Find the position where the engine runs smoothly.
6.5.4. When starting a warm engine the lever should be moved all the way to the
right position.
6.2. Check fuel level.
Page 14