background image

 

1.46   

All trailing cables should be routed so as not to cause any kind of trip hazard.

 

1.47  

NEVER

 work on or near electricity with wet hands, wet clothing and wet gloves.

 

 

1.50   

Batteries (where present). 

1.51   

Batteries present a risk if they become damaged by the possible leaking of  

 

 

electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care 

 

 

should be taken when working on or near them. 

NOTE

 the electrolyte may be in 

 

 

a liquid or gel form.

 

1.52   

Should you come in to contact with electrolyte you should; 

1.53   

Remove all clothing contaminated with electrolyte. If you cannot remove then  

 

 

saturate them in water. 

1.54   

Get medical assistance as soon as possible. You must advise the medical staff of 

 

 

the type of acid. 

1.55   

Lead/acid battery = dilute sulphuric acid. 

1.56   

Nickel/cadmium   = potassium hydroxide alkali electrolyte. 

1.57   

Use fresh running water to wash off excess electrolyte, continue this until medical 

 

 

assistance arrives. Make sure that you do not was the electrolyte to another part of 

 

 

your body or face. 

1.58   

If electrolyte comes in to contact with Eyes the electrolyte needs to be immediately 

 

 

washed away with large amounts of water. Make sure that you do not wash the  

 

 

electrolyte to another part of your face or body. 

1.59   

Gasses from charging batteries are highly flammable and great care should be taken  

 

 

to charge in well ventilated areas. 

 
1.59.1  

There is an explosion risk if the battery terminals are short circuited, when   

 

 

connecting/disconnecting 

ALWAYS

 exercise great care so that the terminals or  

 

 

battery leads are 

NOT

 allowed to touch and cause a spark. 

ALWAYS

 use suitable 

 

 

insulated tools.

 

1.60   

Vibrations (where applicable). 

1.61   

Prolonged use of hand held (operated) machines will cause the user to feel the 

 

 

effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s 

 

 

phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the 

 

 

hand to feel and regulate temperature, causing numbness and heat sensations and 

 

 

may cause never damage and circulatory tissue death. 

1.62   

Not all factors that lead to white finger disease are known, but cold weather, smoking 

 

 

and other diseases that affect blood vessels and blood circulation as well as large 

 

 

and long-lasting impact of shocks are considered factors in the formation of white 

 

 

finger. Note the following to reduce the risk of white finger and carpal tunnel  

 

 

syndrome; 

1.63   

Wear gloves and keep your hands warm. 

1.64   

Take regular breaks. 

1.65   

All of the above precautions may help reduce the risk of white finger disease but not 

 

 

rule out the carpal tunnel syndrome. Long-term and regular users are therefore  

Summary of Contents for HYLS7410





























Reviews: