background image

16 

 

3.2 

  Lubricate the beam area where the splitting wedge will slide with a small amount of 

 

  engine oil. 

DO NOT

 use grease.

 

3.3 

  The log splitter is equipped with a control system that requires the machine to be 

 

  operated by both hands of the user. 

3.4 

  One hand will need to depress the safety handle while the other hand operates 

 

  the control handle. 

 

  This system keeps both hands clear of moving parts for safe operation. 

3.5 

  The log splitter will stop working if either hand is removed. 

3.6 

  Release the control lever to allow the log pusher to return to the start position. 

3.7 

 

DO NOT

 continue to apply pressure once the log has been split, this causes  

 

  unnecessary stress on the rack teeth.

 

3.8 

 

DO NOT

 place your hands on the ends of the log when loading. 

 

  This is an unsafe method and could result in personal injury.

 

3.9 

 

DO NOT

 reach or step across the rail while the log splitter is running.

 

3.10 

 

NEVER

 attempt to split wood across the grain. 

 

  The log splitter was not designed for cross-grain log splitting and doing so could  

 

  damage. 

 

3.11 

  Make sure both ends of the logs you are splitting are as square as possible. 

 

  This will prevent the log from slipping out of position while under pressure. 

3.12 

 

DO NOT

 try and catch the split wood, allow it to fall to the ground.

 

3.13 

 

DO NOT

 attempt to split 2 logs at the same time. One of them may fly up and hit you.

 

3.14 

  If the ram stops before the log has been split, quickly pull the control lever backwards 

 

  to prevent stress on the belts. 

 

  Once the ram is free continue to split the log. 

3.15 

  If a log becomes jammed, release the controls and return the ram to the start position. 

3.16 

  Insert a wedge under the jammed log, start the log splitter to push the wedge under the 

 

  jammed log. 

3.17 

  Repeat above procedure with a sharper slope wedge until the log is completely free. 

3.18 

 

DO NOT

 hit a jammed log with a hammer to try and remove as this may cause damage 

 

  to the machine.

 

 

 

 

   

Wedge

 

 

 

 

 
3.19 

ALWAYS

 keep the guards in place and do not use if a guard is damaged or missing.

 

3.20 

NEVER

 force or push the log when splitting.

 

 

Summary of Contents for HYLS7410





























Reviews: