![background image](http://html1.mh-extra.com/html/hyundai/hyea5080/hyea5080_user-manual_2196647007.webp)
2.
QUICK START
You can also check out our online video at www.youtube.com/hyundaipowerequip.co.uk
2.1.
This guide is meant to serve as a quick reference for operating your Hyundai Earth Auger it is
for convenience and the user should read the safety section first.
FOR OUTDOOR USE ONLY.
This Earth Auger produces carbon monoxide - a poisonous, colourless & odourless gas that can cause
death or serious injury. Petrol is highly flammable, always handle with extreme care and in a well
ventilated area.
Always remove HT lead from spark plug when checking machine or changing parts.
2.2.
This product comes partially assembled and carefully packaged and should include, Power
unit (engine), 3 x Augers (1 x 800mm x 100mm, 1 x 800mm x 150mm, 1 x 800mm x 200mm) each one
has a rubber protection stopper fitted, 1 x 2 stroke fuel/oil mixing bottle, 1 x tool kit containing – 1 x
large Allen key, 1 x box spanner, 1 x spare spark plug, Operator’s manual, Warranty registration form,
Morris lubricants information sheet,
2.3.
At this point, check that you have all of the included items listed above. If any are missing or
damaged, call 01646 687 880 or email [email protected].
2.4.
Attaching auger bit.
Select one of the three auger bits to be fitted. Take the Allen key and box spanner (small end) and undo
the bolt that passes through the end of the auger bit. Once the bolt is removed you can slot the auger
over the end of the power unit drive shaft. Align the hole in the shaft with the holes in the auger bit.
Pass the bolt through the auger and shaft then fit the nut and fully tighten.
Page 7
Ver 3- December 2016