5.
USING THE MACHINE
You MUST STOP using the machine if any of the following occur.
•
The engine speed changes with no control.
•
In case of misfire
•
In case of high vibration.
•
When flames or smoke appear.
•
In rain or stormy weather.
If you are not familiar with this type of machine you should seek advice and guidance from
your dealer.
DO NOT attempt to lift or move the machine while the engine is running.
5.1.
Machine use.
5.1.1. Position the machine in such a way that it cannot move during use, maintenance,
cleaning, adjustment, assembly of accessories or spare parts, as well as under storage.
5.1.2. DO NOT force the machine. Use the correct machine for your application. The correct
machine will do the job better and safer at the rate for which it is designed.
5.1.3. DO NOT change the engine governor settings or over-speed the engine. The governor
controls the maximum safe operating speed of the engine.
5.1.4. DO NOT run the engine at a high speed when you are not using it.
5.1.5. DO NOT put hands or feet near rotating parts.
5.1.6. This machine has a rotating auger drill bit capable of causing serious injury so AT ALL
TIMES you MUST keep hands and feet clear of all moving parts. Failure to observe these
safety instructions could result in serious injury or death.
5.1.7. Avoid contact with hot fuel, oil, exhaust fumes and hot surfaces.
5.1.8. DO NOT touch or allow clothing and other flammable materials to come into contact
with the engine or muffler. These parts get extremely hot from operation. They remain hot
for a short time after you turn off the unit. Allow the engine to cool before doing
maintenance or making adjustments.
5.1.9. If the machine should start to make an unusual noise or vibration, immediately shut
off the engine, disconnect the spark plug HT lead, and check for the cause. Unusual noise or
vibration is generally a warning of trouble. You MUST find the source of the problem and fix it
before reusing the machine.
5.1.10. Use only attachments and accessories approved by the manufacturer. Failure to do so
can result in personal injury, and may invalidate any warranty.
5.1.11. Maintain the machine and check for misalignment or binding of moving parts, broken
parts and any other condition that may affect the machine’s operation. If damaged, have the
machine repaired before reuse.
5.1.12. Keep the engine, exhaust and muffler free of grass, leaves, excessive grease or carbon
build up to reduce the chance of a fire hazard.
Page 11
Ver 3- December 2016