5.2
Using the machine.
ALWAYS Start slowly with half throttle and keep a firm grip on both handles of the auger at all
times. Keep a wide stance
5.2.1. After engine warms up Accelerate the engine, to accelerate the
engine to working
speed squeeze the throttle lever toward the main handle.
5.2.2. DO NOT force the auger drill bit into the ground – instead allow the machine to do
the work. If the machine jams you MUST release the throttle and move the auger drill bit
before re-commencing work.
5.2.3. Blockages - To remove blockages DO NOT under any circumstances use your hands.
STOP and disable the machine and clear the auger drill bit of materials which have become
stuck to auger bit.
Page 13
Ver 3- December 2016
