![background image](http://html.mh-extra.com/html/hyundai/hych15100te/hych15100te_instruction-manual_2196090025.webp)
HOW TO REMOVE THE KNIFE
KNIFE SHARPENING
•
You should never attempt to sharpen the chipper knife (or knives) freehand.
It is extremely important that the 45 degree angle be maintained consistently for
proper performance.
The chipper knife should be taken to a machine shop for proper sharpening.
Excessive heat generated during the sharpening process will damage knives and
weaken the metal. Be sure the knife is not overheated.
•
•
•
KNIFE INFORMATION
•
The chipper knife should be checked routinely for sharpness.
Using a dull knife will decrease performance and cause excessive vibration that will
cause damage to the chipper.
How many times a knife can be sharpened is determined by how much material
needs to be taken off to sharpen or to compensate for dents or gouges.
A new chipper knife has 18mm
measurement
between the short side bevel edge
and the knife mounting holes.
•
•
•
23
Stop the engine.
Open the upper disk housing.
Rotate the chipper disk until the four countersunk screws and lock nuts attaching the knife to
the flywheel are visible through the access doors.
Remove all four screws and nuts.
•
•
•
•
REMOVAL, SHARPENING AND RE-INSTALLATION OF CHIPPER KNIFE
Summary of Contents for HYCH15100TE
