For COLD start move choke lever UP to start position. N.B. For a WARM/HOT start you will
probably not need to do this.
Place one hand on the machine, and using the other hand pull the recoil until you feel a
resistance, then pull briskly. Repeat until machine starts.
When the engine starts move the choke to the OFF position. DO NOT let go of the recoil handle
instead allow the recoil cord to return gently. Once started you need to reduce the choke by
slowly moving lever to RUN position if engine falters move choke between START/RUN
positions and adjust until engine runs smoothly.
Page 23
Rev 3 - September 2016
Summary of Contents for HYBC5200
