QUICK START GUIDE
1.
Apply chain brake.
2.
Fill with fresh 2-stroke petrol and synthetic oil mixed at 40:1 ratio.
3.
Fill chain lubricant chamber.
4.
Pump primer bulb 6 times.
5.
Switch ON/OFF switch to ON.
6.
Pull out choke lever.
7.
With chainsaw on the ground, put your right foot on rear handle to secure it.
8.
Pull starter handle quickly.
9.
After about 2-3 pulls the engine may fire slightly. If you continue to pull with
choke OUT it will flood the engine.
10.
Push choke IN.
11.
Pull starter handle quickly and chainsaw engine should start.
With a hot chainsaw, you may not need to use the choke. If it is warm, maybe half
choke.
Page 3
Rev 2
Summary of Contents for HY6222
Page 1: ...PETROL CHAINSAW MODEL HY6222 User Manual...
Page 29: ...Page 29 Rev 2...
Page 30: ...Page 30 Rev 2...
Page 31: ...Page 31 Rev 2...
