6.7.
Engine parameters
Spark Plug Gap
0.7mm-0.8mm
Engine Idle Speed
1600 ± 160rpm
Valve Clearance (Cooled)
Intake valve: 0.1mm - 0.15mm
Exhaust valve: 0.15mm - 0.2mm
7.
STORAGE
7.1.
Pump.
7.1.1.
Remove the priming plug (1) and drain plug (2) from pump
body, flush the chamber with clean water. Replace the priming
plug and drain plug. After stopping the engine, allow it to cool for
at least half an hour and then wipe clean all surfaces.
7.2.
Carburetor.
7.2.1.
Remove the drain plug (3) and washer (2) of the
carburetor float bowl (1) and sediment cup (6) and
‘O@ ring (5), then open the fuel lever (4).
7.2.2.
Completely drain the fuel from the carburetor and
fuel tank, then replace the sediment cup and drain
plug and re-tighten them.
7.3.
Engine oil.
7.3.1.
Change the engine oil.
7.3.1.1.
Remove the spark plug.
7.3.1.2.
Pour a tablespoon (5-10cc) of clean engine oil into the cylinder. Crank the engine
several revolutions to distribute oil around the cylinder bore. Replace the spark plug.
7.3.1.3.
Pull the starter grip slowly until resistance is felt, then release. This ensures that
intake and exhaust valves are kept closed to restrict moisture entering the cylinder head.
Rev 6 - 10/11/2015
