5.
STARTING & STOPPING THE ENGINE
5.1.
Starting the engine.
5.1.1.
Before starting/operating the water pump, please ensure that you are familiar with each
control function and know how to operation these functions in the event of an emergency.
5.1.2.
Check that the engine has been filled with oil and fuel.
5.1.3.
Where fitted move the fuel valve lever (1) to the 'ON' position.
5.1.4.
If the engine is cold, move the choke lever (2) to the 'CLOSED' position.
5.1.5.
Adjust the throttle lever (3)and to change the speed of the engine, which will change the
flow rate of water. For a higher flow rate set the throttle lever to the 'HIGH' position, and for
lower flow rate set the throttle lever to a 'LOW' position.
5.1.6.
Turn the engine switch (1) to the 'ON' position.
5.1.7.
Pull the recoil starter handle (1) lightly until resistance is felt, then pull it briskly.
DO NOT allow the starter grip to snap back. Return it gently to prevent personal injury
and damage to the engine.
Rev 6 - 10/11/2015
