Page 8
5.
ASSEMBLY
Power supply the power tool supply must match the data plate on tool.
5.1.
Attaching the side handle.
5.1.1.
Thread side handle into side handle socket on desired
position and tighten securely. Please use the side handle
fully.
Tool must be used the side handle.
5.2.
Adjusting and disassembling guard.
5.2.1.
When you fit the guard, make sure that the
prominence on the hoop of the guard coincides with the
groove in the gear-case cover.
5.2.2.
Then turn the guard to the working position counter-
clockwise. Lastly, tighten the bolt.
5.2.3.
Before operation, make sure that the guard is fixed
securely.
5.2.4.
By loosening the fixing screw, the guard can be adjusted to desired position, tighten the
fixing screw firmly to fix the guard in the position.
5.3.
Fitting cutting discs.
Unplug tool before changing discs and carrying out maintenance.
Only use grinding wheels with maximum safe operating speed rated at or above
80m/s. Never use damaged or imbalance grinding wheels.
N.B See part locations on previous page.
5.3.1.
Lock the spindle in position by pressing the spindle lock
button (1).
5.3.2.
Slip the inner flange (5) onto the spindle and the side of
“O” ring towards outside, wheel (6) loaded withstood the
inner flange.
5.3.3.
Then thread on the flange (7) screw together to the
spindle (Pay attention to the outer flange the installation direction following chart to show,
when installing the grinding wheel and cutting disc uses different surfaces on the contact
piece.
5.3.4.
Check the compatibility of the wheel (6) and flange, there is no clearance is allowed.
5.3.5.
Lastly tighten the outer flange (7) with the spanner (8).
5.4.
Switching ON and OFF.
Make that the ON/OFF switch operates freely and turn it OFF before connecting
grinder to main supply.