![background image](http://html.mh-extra.com/html/hyundai/hy2156/hy2156_user-manual_2196456007.webp)
Page 7
3.28.
When using a cutting disc, the disc should be prevented from jamming in the cut by the use
of side pressure. When cutting off the cutting disc should be placed in the cutting gap in a straight
position.
3.29.
When using a grinding disc the angle between the grinding disc and work piece should be
between 30° and 40°.
3.30.
Before placing the angle grinder on the workbench or floor it must be switched off and the
grinding or cutting disc must have stopped rotating.
3.31.
Angle grinders must not be used above shoulder height.
3.32.
Grinding or cutting discs must not be run at a rotational speed greater than that shown on
the grinding or cutting disc.
3.33.
Cutting discs must not be used for face or side grinding.
3.34.
Grinding and cutting discs must be used dry.
3.35.
Using water is highly dangerous and could result in an electric shock.
4. QUICK REFERENCE GUIDE and USE
PARTS
1 Spindle Lock Button.
2 Shaft Direction.
3 Spindle.
4 Non-Cutting Guard.
5 Inner Flange.
6 Cutting Disc.
7 Outer Flange.
8 Spanner.
9 Primary Hold.
10 Power Switch.
11 Power Switch Lock
Button.
12 Side Handle.
SPECIFICATIONS
MODEL
HY2156 - 4.5”
HY2157 – 9.0”
No-Load (rpm/min).
10,500
6,200
Voltage – Frequency - Power (w).
230VAC – 50Hz - 600
230VAC – 50Hz - 2,100
Wheel Diameter (mm).
115
230
Spindle Screw Thread.
M14
M14
Weight (Kg).
1.8
6.1
Electrical Class Protection Grade.
回
/II
回
/II
Noise Levels.
88 dB (A) L
pA
- 99 dB (A) L
wA
88 dB (A) L
pA
- 99 dB (A) L
wA
Vibration Level.
A
h,AG =
8.1 m/s
2
A
h,AG =
8.1 m/s
2
Model Shown HY2157