Hyundai HY2000SI Page 44 User Manual Download | Manualshive

Page: 44 / 46

background image

37

Warranty Claim Procedure

Warranty service must be performed by one of our authorized service dealers.
Do not return your product where purchased. If you feel your generator is
malfunctioning due to a defect or misuse, simply contact our customer support
center for technical advice, a warranty claim or general information. Warranty
service, operation assistance and product support is provided by Midland Power
Inc., contact us at the numbers below.

Product Registration Instructions

Product registration is required for product support and warranty coverage. You can
register online at www.hyundaipower.ca. Once your registration is complete, your
receipt will be on file and any future warranty claims will be easily created. If you
wish, you can confirm your registration by calling customer service at
1-877-528-3772 or by e-mail at [email protected]

Proof of purchase may be required for warranty claims. Keep a copy of the original
receipt, UPC code and serial number with this user guide.

Customer Service

Toll Free: 1-877-528-3772

E-mail: [email protected]

Online: www.hyundaipower.ca

«
...
42
43
44
45
46
»

Summary of Contents for HY2000SI















































Reviews:

No comments

Related manuals for HY2000SI

Brand: iPower Pages: 2

Brand: Sangean Pages: 1

615 - DVP 615 - DVD Player

Brand: Zenith Pages: 40

Brand: Briggs & Stratton Pages: 12

Brand: SMC Networks Pages: 2

Brand: SAL Pages: 16

Brand: QFX Pages: 3

Multi-Band AC/DC Portable Radio

Brand: Radio Shack Pages: 16

VarioMatch Match Network VM 1000 Platform

Brand: Advanced Energy Pages: 194

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 20

Brand: Philips Pages: 21

Brand: Philips Pages: 24

Brand: Daewoo Pages: 46

Brand: Harmon/Kardon Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands