Page 15
9.3.
Engine Oil replacement.
After engine has been run prior to changing the oil will be
very hot. Wear correct PPE minimum of gloves and overalls.
DO NOT allow any dust, dirt or any other debris enter oil or crankcase.
Frequent and long term contact of oil with the skin may result skin
disease. Always wear suitable gloves and we recommend that when
finished work that you thoroughly wash your hands with soapy water.
9.3.1.
Place a container under
the engine for containing
used oil. Then, remove the
dipstick and loosen the
draining screw and washer,
9.3.2.
After draining the used
oil, reinstall the draining
screw and washer and
tighten them. In view of
environmental protection,
please take a proper way
to dispose the waste oil.
9.3.3.
Take the waste oil to the
local recycling centre. Never dump waste oil on the ground, in ditches or drains.
Exhaust system
Check for leaks, re-
tighten or replace
gasket as required
●
Check silencer
screen, clean and
replace as required
●
Carburettor
Check Choke
operation
●
Cooling system
Check Cooling fan
for damage
●
Starting system
Check recoil starter
operation
●
De-carbonising
As necessary
●
All fittings and
fasteners
Check all fittings and
fasteners. If missing
or loose, replace
and tighten
●
●
Summary of Contents for HY12000LE
