Do not use the product on a slippery surface.
Do not use the product on steep, slippery slopes.
If the machine has struck foreign objects, check if the tool is damaged and bring it to repair if necessary.
Keep away all body parts from the running machine
Be careful when using the machine in stormy weather. Do not use the machine during lightning,
thunderstorms and bad weather in general.
1.2 FUEL HANDLING
Be very careful when handling fuels. They are flammable and the vapours are explosive.
Use only an approved container.
Never remove the fuel cap or add fuel while the machine is on. Turn off the unit and allow the engine and
exhaust components to cool before refuelling.
Do not smoke.
Never refuel inside a room
Never store the tool and the fuel tray indoors where there is a naked flame, such as near a water heater.
If fuel has spilled, do not attempt to start the machine, but rather move it away from the spill before
starting to use it. Clean any spills.
Replace and tighten the fuel tank cap after refuelling.
Follow the instructions in this manual for filling the tool with fuel.
1.3 DURING MAINTENANCE AND STORAGE
Stop the tool and wait until it stops. Make sure all moving parts have come to a standstill.
Allow the machine to cool before performing inspection, adjustments, maintenance, servicing and
storage.
1.4 RESIDUAL RISKS
Even if you use this product in accordance with all safety requirements, the potential risks of injuries and
damage remain. The following hazards might happen within the structure and design of this product:
There are adverse health consequences due to the emission of vibrations if the product is used over
long periods of time or not managed properly and maintained in a suitable way.
There are risks of injuries and property damage caused by the attachments or broken attachments or
sudden impact of hidden objects when using the cutting function.
Risk of damage to persons and property caused by flying objects.
A prolonged use of this product exposes the operator to vibration and may determine the so-called "white
finger" disease. To reduce the risk, please wear gloves and keep your hands warm.
If any of the symptoms of the "white finger" syndrome appear, consult a doctor immediately. Symptoms
of the "white finger" include: numbness, loss of sensitivity, tickling, tingling, pain, loss of strength,
colour changes or skin condition. These symptoms usually appear on fingers, hands or wrists. The risk
is higher at low temperatures.
Risk of hearing loss if the machine is used for long periods of time without hearing protection.
05
