6
HPT-IM12-1 User Manual
Loading and Operation
1.
Only use impact sockets that are specifically designed for use with
impact wrench.
2.
Connect the wrench to the air hose.
3.
Place the socket over the subject nut and depress the trigger to oper-
ate the wrench.
4.
To change direction, push the button at the top of the handle. Direc-
tion of R for reverse and F for forward.
5.
The flow of air may be regulated by adjusting the flow valve at the
base of the handle.
6.
Ensure the air supply is clean and does not exceed 90 PSI. Too high
an air pressure and unclean air will shorten the product life and may
cause damage or personal injury.
DO NOT use any additional force upon the wrench in order to remove a
nut.
DO NOT allow wrench to run free for an extended period of time, as this
will shorten its life.
Maintenance
WARRANTY NOTICE:
This tool must be serviced by an authorized Hyundai
Service Dealer during its warranty period. Failure to do so will void the warranty.
Disconnect wrench from the air supply before changing accessories, servicing
or performing maintenance.
1.
Lubricate the air wrench daily with a few drops of air tool oil dripped
into the air inlet
2.
Do not use worn or damaged sockets.
3.
Loss of power or erratic action may be due to the following:
•
Excessive moisture or restriction in the air pipe. Incorrect size or type
of hose connectors. To remedy this problem, check the air supply and
follow instructions.
•
Grit or gum deposits in the wrench may also reduce performance.
If your model has an air strainer, located in the area of the air inlet,
