Original Instruction manual
5. Clean fuel tank and filter it every 100 hours of use;
• Open the cap of the fuel tank, remove the fuel filter and use a brush to clean.
•
Clean the tank; remove dirt and stagnant water.
• Replace the fuel filter.
• Fill the fuel tank to the red line representing the maximum fuel level.
6. After two years of use, check for wear and flexible hoses. If the hose or hoses are cracked , replace them with
new parts.
7. Before storing the cleaner for a more or less extended period, take a number of preventive measures against
degradation:
• Drain the tank, fuel hose and carburettor,
• Pour a glass of oil in the tank engine, shake the machine to distribute the oil to all internal walls of the
tank, and then remove excess oil.
• Remove the spark plug, put a spoonful of SAE 10W30 engine oil 20W40 or in housing of the spark
plug, and then put the candle.
• Pull the starter grip to gently rotate the engine (with the switch to OFF position) stop pulling the
starter cord when resistance is felt in the hand.
• Put the cleaner in a place where the temperature does not drop below 0 °. Put antifreeze in the water
circuit.
NOTE:
Treating used lubricating oil in a manner compatible with the environment.
We strongly advise you to put it in a sealed container and bring it to a local recycling service. Never
discard with household waste or pour onto the ground.
