Hyundai HLT 2601 HD, Instruction Manual

Page: 74 / 80

• Switch on your TV and put the video recor-
der on the test signal. (See the booklet for
your video recorder.)
• Enter the Install menu and select search.
• Search for the test signal of your video recor-
der in the same way as you searched for
and stored the TV signals. Store the test
signal under programme number 0.
• Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV
(EXT-4) input at the right side of the TV.
• Connect your equipment to the TV viaVIDEO
(yellow), AUDIOR (red) and AUDIOL (white)
inputs. You must connect the jacks to the
input using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input (EXT-4S) at the right side of the TV.
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV inputs by using
S-VHS cables.
EXT-2 S Mode
If the equipment connected to your TV set sup -
ports S-Video (Y/C) output from Euroconnector,
you can have a better picture quality by selecting
EXT-2 S mode and connecting your equipment
to the EXT.2 (EXT-2 S) terminal of TV. See your
equipment’s booklet to check if your equipment
has such feature.
Connect The Decoder To The
Video Recorder
Some video recorders have a special Scart
socket for decoder.
• Connect a Scart cable to theScart socket of
your decoder and to the special Scart soc-
ket of your video recorder. Refer to the booklet
of your video recorder.
• To connect your video recorder to the TV, refer
to the TV and Video Recorder section.
If you want to connectmore equipment to your
TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the right
side of the TV, to connect headphones.
ENG - 74