Hyundai HLT 2601 HD, Instruction Manual

Page: 60 / 80

ENG - 60
Before Switching On Your TV
Power Connection
IMPORTANT:The TV set is designed to operate
on 230V AC, 50 Hz .
•After unpacking, allow the TV set to reach the
ambient room temperature before you connect
the set to the mains.
Connections To TheAerial Input Socket
• Connect the aerial or cable TV plug to the
Aerial input socket located at the rear of the
TV and connect the cable plug coming out
from the TV out socket located on the devices
(VCR,DVB-T etc.) to this socket aswell.
How To Connect Other Devices
IMPORTANT
: Switch off theTVbefore connecting
any external device.
Sockets for external connections are at the
rear side of the TV. For connection of other
devices via Scart refer to the manuals of the
related devices.
Inserting Batteries In The Remote Control
Handset
•Remove the battery cover located on the back
of the handset by gently pulling downwards
from the indicated part.
• Insert twoAA/R6 or equivalent type batteries
inside. Place the batteries in the right directi-
ons.
• Replace the battery cover.
NOTE: Remove the batteries fromremote control
handset when it is not to be used for a long
period.Otherwise it can be damaged due to
any leakage of batteries.
SwitchingTheTVON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the system.
Press On/Off switch at the rear of the
TV. Then the TV switches it self to stand-by
mode and the LEDbecomes BLUElocated
onthefront of theTV.
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press “ ”, „ -P/CH “ or „ P/CH+ “ button on the
right side of the TV or press “-P” or “P+” button
on the remote control, so that last switched
off programme is selected.
By either ways the TV will switch on and the
LED will turn off.
To switch the TV off:
• Press the “stand-by” button on the remote
control, so the TV will switch to stand-by
mode and the LED will become BLUE,
or,
Press the “ ” button located on the right side
of the TV, so the TV will switch off and the
LED
will become BLUE.
To power down the TV completely, press On/
Off switch,
or
unplug the power cord from the mains socket.