Hyundai HLT 2601 HD, Instruction Manual

Page: 61 / 80

ENG
ENG - 61
Initial Settings
Initial APS (Automatic Programming Sys -
tem)
The following menu will be displayed on the
screen when you turn your TV on for the first
time. APS, searches and sorts all channels
and stores them automatically on your TV, accor -
ding to the transmission of programme systems
in your area.
First of all choose Language and Countryby
using „ / “ and „ / “ buttons. This will affect
the sort process in APS. To start APS, press
the REDor “OK” button
AfterAPS is finalized, the programme table will
appear on the screen. In the programme table
you will see the programme numbers and names
assigned to the programmes.
If you do not accept the locations and / or the
programme names of programmes, you can
change them from the Program Menu. ( See
page 76 )
Operating The TV
You can operate your TV using both the remote
control handset and the buttons on the
set.
Operating with the buttons on the TV set
Volume setting and programme selection can
be made by using the buttons on the control
panel at the right side of the TV.
Volume Setting
Press the „ “ button to decrease volume
or the „ “. button to increase volume, so a
volume level scale (slider) will be displayed at
the bottom of the screen.
Programme Selecting
Press the „+P/CH“ button to select the next
programme or the „P/CH-“ button to select
the previous programme.
Entering TheMenu
Press the “MENU” button on the control panel
at the right side of the TV to enter the menu.
„ + P/CH “ nebo „ P/CH -“ and „ “ „ “ buttons
on the TV are used as navigation buttons in the
menu.
AVMode
Press the „TV /AV“ button on the control panel
at the right side of the TV to switch your TV to
EXT modes.
Operating With Remote Control
The remote control handset of your TV is desi -
gned to control all the functions of your TV.
The functions will be described in accordance
with the menu system of your TV.
Functions of the menu system are described
in Menu System section.
Volume Setting
Press the “ V + ” button to increase volume.
Press the “ - V ” button to decrease volume. A
volume level scale (slider) will be displayed at
the bottom of the screen.