Page 1 of 13
Sales Office
4th Fl., First Tower,
55, Bundang-ro, Bundang-gu,
Seongnam-si, Gyeonggi-do,
13591 Korea
Factory
313, Soi-ro, Soi-myeon, Eumseong-gun,
Chungcheongbuk-do 369-872, Korea
INSTALLATION MANUAL (
HiE-SxxxSG/SI
, IEC)
Issued on Sep. 17
th
, 2019
1. General Information
·
This Installation manual contains information regarding the installation and the safe handling method
of the photovoltaic module (hereafter referred to as “
module
”) supplied by Hyundai Energy Solutions
Co., Ltd. (hereafter referred to as “
HES
”).
·
HiE-SxxxSG: 340 pieces, 325-350W, 1500V
HiE-SxxxSI: 408 pieces, 395-420W, 1500V
·
System users and installers should read and understand this manual before handling, installing the
module. Please contact Customer Support department or our local representatives for more detailed
information.
·
Before installing solar photovoltaic systems, mechanical and electrical requirements for the total
system should be checked as well. Keep this manual in a safe place for future reference.
·
The installer should consider every safety precautions specified in this manual and local codes when
installing a module.
·
HES modules are tested and certified for installation worldwide. Different regions may have different
regulations for solar PV installations. In this manual, hereafter “IEC only” is used to refer to regions
where IEC standard applies, e.g. Europ
e, Middle East, most of Asia Pacific countries; “UL only” is
used to refer to regions where UL standard applies, e.g. United States, Canada; all other references
are global.
1.1
·
Installing solar photovoltaic systems requires specialized skills and knowledge. Thus, before
installation, wiring, and operation of photovoltaic modules, system users and installer should
understand and conform to this manual.
·
Installation and wiring should only be performed and supervised by qualified persons.
·
Each module has a junction box for permanent cable connection. HES can provide customers with
fitted cables for easy installation. Installers should secure the safe installation status including all
electrical hazards.
1.2
·
Installers should secure the installation status, without limitation, including the risk of electric shock.
·
Backsheet of PV module should be kept safe from any damage or scratch to prevent mechanical or
electric shock.
·
Do not disassemble or remove any part of a PV module. Such actions may cause electric shock, fire
or damage.
·
Keep safety regulations for all components used in the system, including wiring and cables,
connectors, charging regulators, inverters, storage batteries and rechargeable batteries, etc.