background image

10

• 

Allow the generator set to cool down before performing any 

maintenance.

• 

Always wear safety glasses when cleaning the generator set with air.

• 

Do not clean the generator set with a pressure washer because it can 

cause damage to the generator set.

• 

Before working with batteries, ventilate the area, wear safety glasses, do 

not smoke and always disconnect the negative cable first and reconnect 

it last.

• 

Use rubber gloves when coming into contact with engine oil.

• 

Always stop the generator set before removing the oil filler cap.

• 

Only qualified maintenance personnel with knowledge of fuels, 

electricity, and machinery hazards should perform maintenance 

procedures.

1.4 - Other Safety Hazards

• 

To avoid breathing in poisonous carbon monoxide from the exhaust 

gases, adequate ventilation should be provided if the generator set is 

running in a partially enclosed space.

• 

If the generator set is stored outdoors, check all the electrical 

components on the control panel before each use. Moisture can 

damage the generator and can lead to an electric shock.

Summary of Contents for HCP3550










































Reviews: