Hyundai HCP3550, User Manual

Page: 18 / 41

18
INSTALLATION INSTRUCTIONS
1. Attach the handle bar to the upper frame of the generator. Tighten the
bolts (14) and nuts (7) to the upper frame of the generator.
2. Attach the two peg stands to the bottom of the frame of the generator
Tighten the two bolts (6) and two nuts (7) to the lower frame of the generator.
3. Place the two wheels (5) on the wheel axle (4) and then secure the wheels
using the washer (8) and cotter pin (9) to the wheel axle (4).
4. Attach the wheel axle (4) to the bottom of the generator frame. Align the
bolts (6) with the holes on the bottom of the generator and fasten tightly
with the nuts (7) provided. Refer to the figure.
NUMBER PART NAME QUANTITY
1 Rubber Feet 2
2 Rubber Handle 1
3 Bolt M6 x 10 2
4 Wheel Axle 1
5 Wheel 2
6 Bolt M8 x 16 8
7 Nut M8 11
8 Washer 2
9 Cotter Pin 2
10 Axle Holder 1
11 Stand 2
12 Connecting Block 1
13 Handle 1
14 Bolt M8 x 45 3