background image

7-51

7

Maintenance

If the electrical system does not
work, first check the driver’s side
fuse panel.
Before replacing a blown fuse, dis-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and we
recommend that you consult an
authorized HYUNDAI dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and fusible link for higher
amperage ratings.

The actual fuse/relay panel label
may differ from equipped items.

NOTICE

Fuse replacement

Never replace a fuse with any-
thing but another fuse of the
same rating.

A higher capacity fuse could
cause damage and possibly a
fire.

Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.

WARNING  

Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.

CAUTION

When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips. The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.

Do not remove fuses, relays
and terminals fastened with
bolts or nuts. The fuses,
relays and terminals may be
fastened incompletely, and it
may cause a possible fire. If
fuses, relays and terminals
fastened with bolts or nuts are
blown, consult with an author-
ized HYUNDAI dealer.

Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.

CAUTION

procarmanuals.com

Summary of Contents for H350 2016


























































































































































































































































































































































































































































































Reviews:

Related manuals for H350 2016