Hyundai H-LCD2209, Operation Manual

Page: 9 / 31

9
Insert the batteries in the RC
Remove the battery cover by pressing the symbol and pulling the cover space in the direction of the
arrow.
Insert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks inside the unit.
Replace the battery cover by sliding it in until you hear a click sound.
Note: If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new
batteries.
Use of RC
Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may prevent
proper operation.
Note: The illustration is for your reference only; the remote sensor may locate differently with different
model.
Cautions regarding use of RC
Do not expose the RC to liquids, and do not place in an area with high humidity.
Do not install or place the RC under direct sunlight. The heat may cause deformation of the unit.
The RC may not work properly if the remote sensor of the main unit is under direct sunlight or strong
lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the RC closer to the
remote sensor.