![background image](http://html.mh-extra.com/html/hyundai/h-hu4-3-u11e/h-hu4-3-u11e_instruction-manual_2196530020.webp)
IM2021
20
INSTRUCTIONS FOR USAGE
•
Put the humidifier on a flat surface.
•
Remove the top cover, fill water into the water tank and then put back the top cover.
Alternatively, take out water tank for filling water, afterwards put the water tank back on the
main base.
•
Check if the rated voltage meets the input voltage, and plug into the socket.
•
The LED display will flash once and a beep sound will be heard. The humidifier is in standby
state. “ON/OFF” button
will be red.
•
Touch the “ON/OFF” button
on the control panel to switch on the humidifier, display will
light up and all buttons will be white. Indicator light will be on (with 7
-
color changing). Display
shows current humidity, current temperature and “AUTO” symbol
. It means
humidifier works under AUTO MODE.
•
Touch the “MIST OUTPUT” button
to adjust the mist output, meanwhile “AUTO”
symbol will disappear.
= level 1,
= level 2,
= level 3.
•
Long touch “MIST OUTPUT” button
to entre NIGHT MODE. Display will become dim
and show NIGHT MODE symbol
, indicator light will be off. 10 seconds
later, whole
display will be off except NIGHT MODE symbol
. There is no operative sound and
waterless warning sound under this mode. Long touch the button again to exit NIGHT
MODE.
•
Touch the “HUMIDITY” button
to set your expected humidity from 30%RH to
75%RH,
display will show symbol
. Touch once, it will increase by 5%RH.
•
The LED display will flash the expected humidity three times and then turn back to show the
current humidity. The humidifier enters into the constant humidity function, the expected
humidity is set.
•
Under constant humidity function, humidifier will adjust mist output level automatically.
•
When the expected humidity is 1%RH ~ 10%RH higher than current humidity, humidifier
works in level 1.
•
When the expected humidity is 10%RH ~ 15%RH higher than current humidity, humidifier
works in level 2.
•
When the expected humidity is 15%RH higher than current humidity, humidifier works in
mist output level 3.
•
When the expected humidity is less than the current humidity, the devise will be in sleeping
state. (Timer function is still working under this state.)
•
When the expected humidity is higher than the current humidity, the humidify function will
work again.
•
Touch the button till the LED display shows “Co”, or long touch the button, it means to
cancel the humidity setting and back to AUTO MODE.