Hyundai H-DH20-P83WF, Instruction Manual

Page: 25 / 36

IM2021
25
8. OPERATION
Control panel
Press the STAND-BY button to turn on the machine, the running indicator lights up and the
default fan speed is high, and the default humidity setting is 50%. When the machine is running,
press the power button to turn off, the running indicator light goes off and the compressor stops
immediately, and then the fan will shut down after 30 seconds delay.
Auto mode - continuously drying mode- cycle, press once to switch the mode from one to
another, the corresponding indicator lights up.
●
Auto mode
: when environmental humidity ≥ set humidity +3%, the fan starts working and
compressor starts working after 3 seconds.
When environmental humidity ≤ set humidity -3%, the compressor stops working and and the fan
delay shutdown.
Both fan speed and humidity can be adjusted under auto mode.
●
Continuously drying mode : The machine continues to run, but the humidity can not be
adjusted.
Press the sleep button, the indicator lights up and activate the sleep mode function and touch
the button again to close the function.
In sleep mode , the fan speed will be switched to low fan speed automatically , and after no
operation for 10 seconds, except sleeping mode indicator light , power indicator light ,water tank
full indicator light and child lock indicator light , other the indicator lights and display screen will
be off .
When room humidity ≤ 57%RH
，
the compressor will stop working and the fan will stop working
after 30 seconds later
When room humidity ≥ 63%RH
，
the fan will start working and compressor will start working after
3 seconds later.
The fan speed setting function and humidity setting function is ineffective in this mode, you can
not set humidity value and fan speed