Hyundai H-CDM8055, Instruction Manual

Page: 21 / 56

21
Bluetooth operatons
Pairing
1. In any mode, press and hold PAIR/MODE button; “Pairing…” will appear on the display.
2. On the mobile phone, select the Bluetooth set up.
3. “H-CDM8055” should appear in the list on your mobile phone, please select “H-CDM8055” and then input password “1234”.
4. When successful paired, “Pairing OK” will be displayed on the display.
5. When pairing failed, “Pairing Failed” will be displayed on the display. You can press and hold PAIR/MODE button again to try
the pairing again within several seconds. If there is no operation after several seconds, the display will return to the previous
mode automatically.
Note: During pairing, only RELEASE button, UP/DOWN cursor buttons and POWER/MUTE button are functional, other buttons are
disabled during pairing mode. When pairing, you can press BAND/HANG UP/LOUD/SCH/CLR button to terminate the pairing.
Connect
This unit has a built-in auto-reconnection function. Every time you press CALL button, the unit will auto reconnect with the mobile
phone (
Note : the mobile phone must have been paired with the unit before.). In the following conditions you can reconnect manually
by pressing and holding 0/DSP/CON button, and “Connect...” will appear on the display; when reconnect is successful “Connected!
OK!” will be displayed. And you can hear beep tone. When reconnect is failed “Connecting Failed!” will be displayed on the display
for several seconds. And you can hear beep tone.
1. If the mobile phone is out of range, the connection will be lost, when you come back to the unit, reconnection is necessary.
2. When the mobile phone is out of range from the unit, and there is an incoming call, when you come back to the unit, and you
want to transfer the audio to the unit, you need to reconnection.
3. When you press RELEASE button, the connection will break off. When you install the front panel, you need to reconnect.
4. If you turn off the mobile phone that was paired with the unit, when you turn on the mobile phone, you need to reconnect.
T-Menu
When successful paired, shortly press T-MENU button to enter the telephone menu; keep pressing this button or press LEFT/RIGHT
cursor buttons to change the items in the menu. The items will be displayed in the following sequence: Speed dial/Received list/Dialed
list/Missed list/Phone book (Mobile Phone)/Phone book (SIM Card)/Auto answering/Ring volume.