Hyundai H-CDM8055, Instruction Manual

Page: 11 / 56

11
General operations
Resetting the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RELEASE button on the panel to
open the front panel and press RESET button with a thin hard object to restore the unit to the original factory settings.
Power ON/OFF
Press MUTE/POWER button to switch the unit on. The display will show a greeting message. Press and hold this button to switch the
unit off. The display will show a message “Have a nice day!”.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the
stored status you set.
Volume control
Press UP/DOWN cursor buttons. The larger the number shown on the display is, the higher the volume level is.
Sound settings
Press SEL/MENU button shortly to enter the audio setting mode. Press SEL/MENU button repeatedly or press LEFT/RIGHT cursor
buttons to select a parameter: Bass => Treble => Balance => Fader. Press UP/DOWN cursor buttons to adjust each parameter.
Mute function
Press MUTE/POWER button to cancel the sound. Press it again or change the volume level to resume.
Mode selection
Press PAIR/MODE button to cycle through the play modes: RADIO => CD => USB => CARD => AUX => BT.
Note: USB, CARD, CD modes will only show on the display when a USB flash, SD/MMC card or a disc is connected to the unit.
LOUD function
Press and hold BAND/HANG UP/LOUD/SCH/CLR button to enable LOUD function; “LOUD” will appear on the screen. Press and
hold this button again to cancel the function.