Hyundai H-CDM8055, Instruction Manual

Page: 14 / 56

14
Radio operations
BAND selection
Press BAND/HANG UP/LOUD/SCH/CLR button repeatedly to select your desired radio band in RADIO mode: FM1, FM2, FM3,
MW1 (AM1), MW2 (AM2). Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
Press LEFT/RIGHT cursor buttons to enable automatic search of a radio frequency. Press and hold the buttons to enable manual
seeking mode. “Manual seeking” will appear on the display. Now press LEFT/RIGHT cursor buttons repeatedly to change the
frequency step by step. If both buttons have not been pressed for several seconds, the unit will return to auto seek mode and “Auto
seeking” appears on the display.
Automatic store/scanning
Automatic memory storing
Press and hold */AS/PS button; “Auto storing” will appear on the display. The radio will search from the current frequency and
checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset
number button.
Program scanning
Press */AS/PS button to scan preset stations. And the corresponding station number P1-P6 will flash on the display.
Station storing
Press any of number buttons (1-6) to select a station, which had been stored in the memory. Press and hold this button for several
seconds, current station is stored into the number button.
RDS (Radio Data System) function
Note:
RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area,
the following service is not available, either.