![background image](http://html1.mh-extra.com/html/hyundai/h-ccr8100/h-ccr8100_instruction-manual_2196837013.webp)
Operation
13
(regardless of the current mode) and
begin broadcasting the announcement.
After the traffic announcement is over,
it will return to the previous mode
and volume level. To interrupt traffic
announcement press TA button shortly;
it will not switch off the TA mode.
PTY (Program Type)
This radio will allow you to select
the type of program required, and will
search for a station broadcasting that
type of program.
Press and hold BND/PTY button on
the panel or PTY button on the RC to
show the music type. Then press 1 - 6
number buttons to choose different
music programs available.
Press and hold BND/PTY button
on the panel or PTY button on the RC
twice to show the speech type. Then
press 1 - 6 number buttons to choose
different speech programs. Each
number button will show 3 different
speech programs for you to choose
(see table below).
Button
Music group
Speech group
1
Pop, Rock
News, Affairs,
Info
2
Easy, Light
Sport, Educate,
Drama
3
Classics
Culture,
Science, Varied
4
Jazz,
Country
Weather,
Finance,
Children
5
Nation,
Oldies
Social,
Religion,
Phone IN
6
Folk
Travel, Leisure,
Document
When PTY is selected, the radio
starts to search corresponding
PTY information, and stops if the
corresponding PTY information is
detected. If no buttons are pressed
within several seconds, previously
selected PTY is searched. If desired
PTY is not found, the unit will return
to previous mode. Press PTY/CLK
button on the panel or PTY button on
the RC to switch the PTY function off.
Other parameter setting
To choose the corresponding option,
press and hold SELECT button on the
panel or SEL button on the RC for 2
seconds, then press it repeatedly until
the display shows the needed option.
Turn VOLUME knob or press VOL+/
VOL- buttons on the RC to choose the
needed value. After choosing, leave
the unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek
for traffic announcement program
when TA button is pressed; in TA
ALARM the unit does not retune to TA
information.
PI SOUND/PI MUTE
PI sound refers to the reception
noise when the AF function tries to
scan alternative frequency.
MASK DPI/MASK ALL
During MASK DPI mode, the unit
will mask only the AF which has
different PI, this is the default mode;
during MASK ALL mode, the unit
will mask the AF which has different
PI and no RDS signal with high field
strength.
Summary of Contents for H-CCR8100
