![background image](http://html1.mh-extra.com/html/hyundai/h-ccr8100/h-ccr8100_instruction-manual_2196837011.webp)
Operation
11
sound.
Loudness
Press SELECT button on the panel
or SEL button on the RC repeatedly
until LOUD ON (OFF) is displayed.
Rotate VOLUME knob or press VOL+/
VOL- buttons on the RC to select
loudness ON or OFF. Activating this
feature will enhance bass and treble
frequencies when listening to music at
low volumes.
Audio parameter setting
Press SELECT button on the panel
or SEL button on the RC repeatedly
to select a parameter: VOL (volume)
=> BAS (bass) => TRE (treble) =>
BAL (balance) => FAD (fader). Rotate
VOLUME knob or press VOL+/VOL-
buttons on the RC to adjust each mode:
• Bass/Treble: from -10 to 10;
• Balance: L10 (left) to R10 (right);
• Fader: from R10 (rear) to F10
(front).
When DSP is on, bass and
treble are not adjustable.
Preset EQ modes
Press SELECT button on the panel
or SEL button on the RC repeatedly
until EQ OFF is displayed. Rotate
VOLUME knob or press VOL+/VOL-
buttons on the RC to select between
FLAT/CLASS/ROCK/POP and OFF
equalizer modes.
Beep function
Press SELECT button on the panel
or SEL button on the RC repeatedly
until BEEP ON (OFF) is displayed.
Rotate VOLUME knob or press VOL+/
VOL- buttons on the RC to select
between ON (beep sound is heard
when a button is pressed) and OFF
(no sound is heard when a button is
pressed).
Clock
Press and hold BND/PTY button
on the panel or CLK button on the
RC to display the time on the screen.
Then press and hold this button again;
the time indication will blink. Rotate
VOLUME knob or press VOL+/VOL-
buttons on the RC to adjust hours or
minutes. To confirm the adjustment,
press BND/PTY button on the panel
or CLK button on the RC or leave the
unit idle for several seconds.
Aux In
AUX-in jack is intended for
connecting an external audio
equipment to amplify the sound. If
connection is made correctly, the
audio signal from the external source
will be translated through the acoustics
of the head unit. This enables to
adjust the volume and quality of the
sounding. For example, you can
connect an MP3-player to listen to
tracks using the car acoustic system.
Radio operations
Band select
In Radio mode press BND/PTY
button on the panel or BND button on
the RC to select a radio band: FM1,
FM2, FM3 and AM1, AM2. 6 stations
can be saved in each band.
Summary of Contents for H-CCR8100
