Hyundai H-AS1202iu, Instruction Manual

Page: 5 / 13

5
Instruction manual
Alarm operation
Alarm 1
• Slide AL1 switch to ON position. In
standby mode press ALARM button; the last
set alarm time will be displayed and the alarm1
icon will blink in the left top corner of the
display. Press
or buttons to select the
alarm1 sound: Radio => iPod => USB => SD
=> Buzzer (corresponding word will blink in the
left part of the display). Press ALARM button
again; hour digits will blink. Press repeatedly
or button to set hours. Press ALARM
button again; minute digits will blink. Press
repeatedly
or button to set minutes.
Press ALARM button again; week days will
blink. Press repeatedly
or button to
select everyday, weekdays or weekend alarm
operation mode. Press ALARM button to
confirm the alarm settings.
• If radio is set as alarm sound, the last
listened frequency will be played when the
alarm time comes. If USB/SD/iPod/iPhone is
set as alarm sound, the last listened track will
be played when the alarm time comes. If USB,
SD or iPod/iPhone is set as alarm sound but
no USB/SD/iPhone/iPod is connected, the
alarm sound is buzzer by default.
• The alarm will sound for 60 minutes (except
buzzer which sounds for 10 minutes), the alarm
icon flashes during this period. To stop the
alarm, slide AL1 switch to OFF position; the
alarm icon will disappear from the display.
• When the alarm is sounding, press
SNOOZE button. The alarm will interrupt and
resume the signal after 9 minutes.
Alarm 2
Slide AL2 switch to ON position. In
standby mode press twice ALARM button;
the last set alarm2 time will be displayed
and the alarm2 icon will blink in the right top
corner of the display. All the other operations
fully correspond to operations described in
Paragraph “Alarm 1” above.
Nonrecurring alarm (NAP)
• In standby mode press thrice ALARM
button; 0:00 will be displayed and NAP will
blink. Press
or buttons to select the NAP
alarm sound: Radio => iPod => USB => SD =>
Buzzer (corresponding word will blink in the left
part of the display). Press ALARM button again;
hour digits will blink. Press repeatedly
or
button to set hours. Press ALARM button
again; minute digits will blink. Press repeatedly
or button to set minutes.
• The NAP alarm will be active only once,
and then it should be reset anew, if needed.
Sleep timer
• In iPod, AUX, USB, SD or radio mode
press and hold RPT button to enable sleep
timer setting mode; SLEEP will flash. Press
RPT button repeatedly to select the sleep time
period (from 90 to 00 minutes). The unit will
automatically go to standby mode when the
sleep time period elapses.
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit shall not
be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on the unit. Normal ventilation of the
unit shall not be impeded for intended use.
Accessories
Audio system 1 pc
Instruction manual 1 pc
Warranty card 1 pc
Consumer information 1 pc