Hyundai H-AS1202iu, Instruction Manual

Page: 4 / 13

4
Instruction manual
Radio operation
• Press MODE button repeatedly to select
radio mode. The current frequency and RADIO
icon will be displayed.
• For FM reception extend the wire antenna.
• For automatic search of a station, press
or button; the unit will look for the
next available station and start its broadcast.
Repeat the operation to search more
stations. Press and hold
or button to
automatically search and save all available
stations (maximum 30).
• Press button to call a saved station.
The position number will be displayed.
USB/SD operation
Connecting USB/SD
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. Press MODE button repeatedly to select
USB or SD mode.
• Press button, the unit will start reading
the device. When the tracks are played, the
display shows the playback time.
Playback operations
• During playback press button to pause
playback. Press this button again to resume
playback.
• During playback press or buttons to
go to previous or next track.
• During playback press RPT button to select
REPEAT (repeated playback of the current
track), REPEAT ALL (repeat all tracks) or switch
of the repeat mode.
General USB/SD notes
• This unit is equipped with a USB socket
that can play audio files stored on standard
USB flash (compatible with USB version 2.0)
up to 16 Gb.
• This unit is also equipped with an SD
card socket that can play audio files stored on
standard SD cards up to 16 Gb.
Always switch off the unit or change
mode to another one before removing a USB
flash drive or SD card, to prevent damage to
your USB device or memory card.
Although this product is fully compatible
with USB 2.0 and SD card standard formats,
a small percentage of USB flash drives and
SD cards might not be readable, due to those
device manufacturers’ non-compliance with the
full (official) USB and SD card standards.
• FAT32/FAT32 file system is supported by
USB and SD of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: use of external USB drives
containing BIN files in root directory may cause
malfunction of unit or damage to the software.
iPod/iPhone/iPad docking
• Connect your iPod, iPad or iPhone to
the jack. Be careful, the jack can be easily
damaged. Ensure the connection is good for a
better contact.
• The battery of the connected device will be
automatically charged by the power of this unit.
• After inserting press MODE button
repeatedly to select IPOD mode. Playback of
the first track contained in the attached device
will start automatically.
• Press button to pause playback.
Press the button again to resume playback.
Press repeatedly
and buttons to go to
previous or next track.
• All playback operations can also be done
by the controllers of the connected device.