5
Instruction manual
under the selected number. You can have
maximum 30 stations in the memory.
• To call a saved station, press PRESET/
button and select a saved preset with
/
buttons.
iPod/iPhone docking
• Connect your iPod or iPhone to the jack. Be
careful, the jack can be easily damaged. Ensure
the connection is good for a better contact.
• The battery of the connected device will be
automatically charged by the power of this unit.
• After inserting the iPod/iPhone press
FUNCTION button on the RC or STANDBY/
FUNC button on the panel until iPod is
displayed on the screen.
• Playback of the first track contained in the
attached device will start automatically. The
display will show the clock.
• Press button to pause playback.
Press the button again to resume playback.
Press repeatedly
and
buttons to go to
previous or next track.
• All playback operations can also be done
by the controllers of the connected device.
• If you unlock your iPhone/iPod, you can
browse its media library by the RC. Use
MENU, ENTER and / buttons to navigate.
• Also you can control the repeat mode with
a REPEAT button on the RC.
Video output from the iPod/iPhone
• You can connect this unit to a TV set or
other device that has a composite video input.
• Securely dock your iPhone or iPod with
video.
• Connect one end of an RCA cable (not
included) to rear RCA video jack on the unit.
• Connect the other end of the RCA cable to
VIDEO IN of the TV set or to the display.
• Press the FUNCTION button to select iPod/
iPhone mode.
• Select a movie from your iPod/iPhone
menu.
• iPod: On the main menu choose video then
select video settings.
• iPod: Make sure the TV Out section is set
to “ON”.
• iPod: Switch back to the movie library and
play the movie of your choice.
Note: Video out will automatic when using an
iPod touch or iPhone
USB/SD operation
Connecting USB/SD
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot and press FUNCTION button on the RC or
STANDBY/FUNC button on the panel until USB
is displayed on the screen. The unit will start
reading the device.
• When the device and tracks on it
are detected, the music begins playing
automatically.
Playback operations
• During playback press button on the
RC or /MEM button on the panel to pause
playback. Press this button again to resume
playback.
• During playback press
/
buttons to
go to previous or next track.
• Press REPEAT button on the RC to
choose the mode: repeat one/repeat folder/
repeat all/do not repeat.
General USB/SD notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 16 Gb.
• This unit is also equipped with an SD card
socket that can accept and play MP3 files
stored on standard SD cards up to 16 Gb.
Always switch off the unit or change
mode to another one before removing a USB
flash drive or SD card, to prevent damage to
