6
Instruction manual
is set as alarm sound but no USB/SD is
connected, the alarm sound is buzzer by
default.
• The alarm will sound for 60 minutes, the
alarm icon flashes during this period. To stop
the alarm, press STANDBY/FUNC button on
the panel or STANDBY button on the RC.
• When the alarm is sounding, press
SNOOZE button on the RC. The alarm will
interrupt and resume the signal after 5 minutes.
Alarm 2
In standby mode press /+ button on the
panel; the last set alarm time will be displayed.
Press and hold this button to enter the 2nd
alarm setting mode. All the other operations
fully correspond to operations described in
Paragraph “Alarm 1” above.
Sleep timer
• In USB, SD or radio mode press SLEEP
button on the RC to enable sleep timer setting
mode. The display will show the sleep time
(120 minutes by default). Press this button
repeatedly to select the sleep time period. The
unit will automatically go to standby mode
when the sleep time period elapses.
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit shall not
be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on the unit. Normal ventilation of the
unit shall not be impeded for intended use.
your USB device or memory card.
Note:
Although this product is fully
compatible with USB 2.0 and SD card standard
formats, a small percentage of USB flash
drives and SD cards might not be readable,
due to those device manufacturers’ non-
compliance with the full (official) USB and SD
card standards.
• FAT32 file system is supported by USB
and SD of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning:
use of external USB drives
containing BIN files in root directory may cause
malfunction of unit or damage to the software.
Alarm operation
Alarm 1
• In standby mode press /- button on
the panel and the last set alarm time will be
displayed. Press and hold this button to enter
the alarm setting mode. Hour digits will blink.
Press repeatedly
/
buttons to set hours.
Press /- button again; minute hours will blink.
Press repeatedly
/
buttons to set minutes.
Press /- button to confirm the alarm time.
• Press repeatedly /- button and choose
the source of the alarm sound(buzzer/radio/
USB/SD/iPod). The icon of the selected alarm
mode will be marked with a blue light indicator.
• If radio is set as alarm sound, the last
listened frequency will be played when the
alarm time comes. If USB/SD is set as alarm
sound, the last listened track will be played
when the alarm time comes. If USB or SD
