Hyundai H-1424, Instruction Manual

Page: 5 / 15

5
Instruction manual
button to resume normal play.
• Press BACK/TUNE-DOWN button to skip
back to previous track. Keep pressing to search
for a particular point at high speed backward.
Release the button resume normal play.
MP3 folder operation
• MP3 discs often have folders (sub-
directories) which contain groups of files.
• If your MP3 disc has folders, you can use
FOLDER/MEM.SET/SKIP+10 button to select
the needed folder. While playback, the display
will show the folder number each 5 seconds.
• If your MP3 disc has no folders, you can
use FOLDER/MEM.SET/SKIP+10 button to
skip 10 songs ahead. This is useful if you
have many tracks and you want to find to a
particular track quickly. Press FOLDER/MEM.
SET/SKIP+10 button several times until you
reach a song number near to your desired
song, and then press BACK/TUNE-DOWN or
NEXT/TUNE-UP repeatedly to arrive and the
exact song you desire.
Good quality sound is guaranteed only
when playing licensed MP3 discs.
Repeat mode
• Press MEMORY/REPEAT/PROG button
once for single track repeat playing.
• Press twice for all track repeat playing.
• To cancel repeat play, press MEMORY/
REPEAT/PROG button again.
Program mode
• Up to 60 tracks can be programmed for
disc play in any order or the same track can be
repeated up to 60 times. Before use, be sure
to press STOP/CD/USB/FM MODE button on
the unit or STOP/FM MODE button on the RC
button.
• Press MEMORY/REPEAT/PROG button,
the track number will flash on the display.
• Select a desired track by using BACK/
TUNE-DOWN and NEXT/TUNE-UP buttons.
• Press the MEMORY/REPEAT/PROG
button to confirm.
• Repeat the 2 steps described above to
enter additional memories into the program if
necessary.
• After a maximum of 60 songs (or less) have
been selected as described above, press PLAY/
BAND(AM/FM) button. The PROG symbol will
remain on to indicate that you have saved a
program-memory (sequence). The unit will play
the disc in the order you have programmed.
The program memory will be cleared
when you press twice STOP/CD/USB/FM
MODE button on the unit or STOP/FM MODE
button on the RC or turn off the CD or power
supply.
• To remove the CD from the unit open the
CD door.
Cassette playback
• Slide FUNCTION switch to TAPE (OFF)
position.
• Press button to open the cassette
compartment.
• Insert a cassette and push the cassette
door to close the cassette compartment. The
full tape reel should be on the right side.
• Press button to start playback.
• Press button to pause playback. If you
press it again the playback will continue.
• Press button to stop playback, press
the button again to open the cassette door so
you can take out the tape.
• When the tape plays to the end, playback
will stop automatically.
• Fast forward and rewind: You can run
forward and rewind the tape. Stop playback.
Use
button for fast forward and button
for fast backward playback. When you have
reached the desired tape point, press
button to stop the process.
Never use fast forward or rewind
operations during playback. This may cause
damage to the tape.