![background image](http://html1.mh-extra.com/html/hyundai/fm-605b/fm-605b_instruction-manual_2197039018.webp)
ENG - 18
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard.
• Don´t put bath salts or bath oil to water in the foot masager.
• If water leaks from the appliance, the appliance should no longer be used.
• Always check the temperature of the water before placing your feet into the Foot Spa.
• Keep cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used
• Do not operate under a blanket or pillow. Excessive heating can occur and cause fire,
electrical shock or injury.
• Individuals with pacemakers should consult a physician before using the product.
• In case of pregnancy, diabetes or illness consult your doctor before using the Foot Spa.
DESCRIPTION OF THE CONTROLS
P1
Cover
P2
Control switch
P3
Massage balll
P4
Air nozzle
P5
Stimus-nodes
P6
IR reflection
P7
Massage wheel
INSTRUCTION FOR USE
Proper use produces a measurable
increase in blood circulation in the skin of
the feet which manifests itself in
a pleasant and lasting feeling of warmth
(rise in skin temperature). Foot massager baths at regular intervals can produce improved
blood circulation in the feet and indirectly in the entire leg area as well.
There are about 200 stimu-nodes act as gentle fingers to make contact with the soles of your
feet and give you most effective and invigorating massage possible. You can easily control their
effectiveness by simply pressing down lightly or letting up the pressure with your feet. There are
14 air jets provide a relaxation warm bubble bath for your feet.
INSTALATION
Place the appliance on a level surface and the non-skid rubber feet will prevent it from slipping.
Be sure the control switch is in “0” position. Then plug the unit into AC outlet (regular household
current). Do not stand on the appliance whenever the unit is operated or not. Do not plug the
appliance in while your feet are in the water.
Fill with warm water (in desired temperature) into the unit and do not fill water over the “MAX”
water-level line on the keel. This unit is designed to maintain the water temperature at a
comfortable level, not to raise it. To check the control switch is in “0” position. Then plug the
power cord into AC outlet (regular household current).