![background image](http://html1.mh-extra.com/html/hyundai/fm-605b/fm-605b_instruction-manual_2197039019.webp)
ENG - 19
ENG
DO NOT CONNECT OR DISCONNECT THE PLUG FROM THE POWER OUTLET WHILE
YOUR FEET ARE IN THE WATER.
Seat yourself comfortably, place feet on the foot rests and select your desired setting.
Using the control switch you can select the desired applications:
VIBRATION M IR REFLECTION (1)
Set switch to this mark if you want to massage your feet in cold water.
A foot vibration massage without water is also possible with this setting.
Dry massage has better result for blood circulation of your feet.
B wHIRLPOOL wITH KEEP wARM (2)
Warmth water footbath with bubbling. Ideal for a footbath or for allowing
stimulation from previous massage appliances to gradually subside.
VIBRATION M wHIRLPOOL wITH KEEP wARM + IR REFLECTION
(3)
Select this setting if you want to have the unit filled with warm water for
a foot massage and bubble bath. The built-in heater delays temperature
drop of the warm water while bathing. Temperature-controlled full-length
heaters under each of foot rests maintain the desired temperature
throughout your massager when you set the rotary switch of the unit.
OFF (O)
Turn the unit off.
MASSAGE BALL ATTACHMENT
CARE AND MAINTENANCE:
To Empty
First, turn off control switch to the position
0
, then unplug the unit. Tip the unit allowing water to
spill out along the drain spout. Never pour water over the control switch.
This is a health care unit, not a washing basin. Clean feet before use and use clean and soft
water. Deposit will clog air jets and undermine the bubble effect. Unplug the appliance form the
socket, cool the appliance before cleaning.
TO CLEAN: After using, simply rinse out with water. Never immerse the entire unit into water.
If you wish, you can wipe off all surfaces with a cloth damped with water and a mild detergent,
then rinse and dry. Never use sharp, abrasive or flammable cleanser. This might destroy the unit
surface and/or the electric insulation.