Quick Start Guide for Testing on COACH
Open Omegawave App.
Have the athlete to be measured to put on all equipment:
(See back for picture)
Thoroughly wet both ECG pads on the chest strap, then put on
Attach 2 electrodes—one in the center of the forehead, the other on the base of
the dominant thumb
Connect the CNS cables to the electrodes, and then attach the cables to the sen-
sor
Connect the sensor to the chest strap and check that the Omegawave logo is not
upside-down relative to the athlete’s head & shoulders
Have the athlete lie down and remain still during testing.
Make sure the iPad’s Bluetooth is on, the volume is turned up, the device is connect-
ed to a WiFi network or cellular data, and that the Omegawave sensor is paired to
the app (If you cannot find the sensor in the Omegawave App, check to make sure it
is not paired in the iPad’s Bluetooth settings—it will be listed as “OW-CB2”).
