Hyundai Excellence H-DVD5017, Instruction Manual

Page: 18 / 53

17
SPDIF setup
·
SPDIF OUTPUT
SPDIF OFF
: no digital signal out (coaxial output off), only analog audio output.
SPDIF/RAW : no decoding in the amplifier digital signal input.
SPDIF/PCM : digital signal output in the decoded PCM form.
·
LPCM OUT
Select PCM frequency at 48 kHz or 96 kHz.
Note : some amplifiers don’t support 96 kHz sampling and cause coaxial output abnormal.
The initial factory setup is 48 kHz.
Dolby digital setup
·
DUAL MONO
Stereo
: stereo output signal.
L-Mono : left output signal.
R-Mono : right output signal.
Mix-Mono : left and right output average signal.
·
DYNAMIC
If watching large dynamic scope movie program at night, selecting this mode you can reduce the
volume to a very low level, at the same time, to keep the fine detail sounds. In this case, this
doesn't disturb the family and keeps the quality sounds.
Channel delay
If the above setups dissatisfy you, you can set the speaker distances in the real conditions. Press
the button UP/DOWN to select the speaker, press the button LEFT/RIGHT to adjust the distance.