
Maintenance
62
7
Engine compartment fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling up.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
front passenger’s side panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized EQUUS dealer.
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Remove the fuse panel cover on
the right side in the engine com-
partment.
2. Remove the nuts shown in the pic-
ture above.
3. Replace the fuse with a new one
of the same rating.
4. Reinstall in the reverse order of
removal.
✽
✽
NOTICE
If the main fuse is blown, consult an
authorized EQUUS dealer.
CAUTION
After checking the fuse panel in
the engine compartment, secure-
ly install the fuse panel cover. If
not, electrical failures may occur
from water contact.
OBH078025
OBH071023N
OBH071024N
Summary of Contents for Equus 2015
Page 6: ......
Page 441: ...Maintenance 64 7 OVI073108N Driver s side instrument fuse panel...
Page 445: ...Maintenance 68 7 OVI073160N Passenger s side instrument fuse panel...
Page 490: ...Index I...