Hyundai Equus 2015, Owner'S Manual

Page: 328 / 500

Driving your vehicle
68 5
Operating conditions
• When the ignition is ON, if you
press the BSD switch, the switch
indicator illuminates and the system
turns on.
• The system operates when the
vehicle speed is below 6.2 mph (10
km/h) with the shift lever in R
(Rear) gear.
• The RCTA (Rear Cross Traffic Alert)
detecting range is 0.5m ~ 20m
based on the side direction. If the
approaching vehicle speed is
2.5 mph (4 km/h) ~ 22 mph (36 km/h)
within sensing range, it is detected.
However, the system sensing
range is different base on condi-
tions. Always pay attention to the
surrounding.
Warning type
• If the vehicle detected by sensors
approaches your vehicle, the warn-
ing chime will sound and the warn-
ing light will blink on the outside
rearview mirror.
• If the detected vehicle is out of the
sensing range from behind your
vehicle, moves in the opposite
direction away from your vehicle or
moves slowly, the warning is can-
celled.
• The system may not operate prop-
erly due to other factors or circum-
stances. Always pay attention to
your surrounding.
❈
If your vehicle's left or right side
bumper is blinded by barrier or
vehicles, the system sensing ability
may be deteriorated.
OVI053132
WARNING
• The warning light on the out-
side rearview mirror and the
head up display will illuminate
whenever a vehicle is detected
at the rear side by the system.
To avoid accidents, do not
focus only on the warning
light and neglect to see the
surrounding of the vehicle.
• Drive safely even though the
vehicle is equipped with a
BSD (Blind spot detection)
system. Do not solely rely on
the system but check for your-
self before changing lanes.
The system may not alert the
driver in some conditions so
always check the surround-
ings while driving.