Convenience Features
5-76
WIPERS AND WASHERS
Type A
ODN8059208L
Type B
ODN8059282L
A. Wiper speed control
ś
MIST – Single wipe
ś
OFF – Off
ś
INT – Intermittent wipe
AUTO* – Auto control wipe
ś
LO – Low wiper speed
ś
HI – High wiper speed
* : if equipped
B. Intermittent wipe time adjustment/
Auto control wipe time adjustment*
C. Wash with brief wipes
Windshield wipers
Operates as follows when the Engine
Start/Stop button is in the ON position.
MIST :
For a single wiping cycle,
push the lever upward and
release. The wipers will
operate continuously if the
lever is held in this position.
OFF :
Wiper is not in operation.
INT :
Wiper operates intermittently
at the same wiping intervals.To
vary the speed setting, turn the
speed control knob.
AUTO
(if equipped) :
The rain sensor located
on the upper end of the
windshield glass senses
the amount of rainfall and
controls the wiping cycle
for the proper interval.
The more it rains, the
faster the wiper operates.
When the rain stops, the
wiper stops.To vary the
speed setting, turn the
speed control knob.
LO :
The wiper runs at a lower speed.
HI :
The wiper runs at a higher speed.
Information
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or until
the snow and/or ice is removed before
using the windshield wipers to ensure
proper operation.
If you do not remove the snow and/or ice
before using the wiper and washer, it may
damage the wiper and washer system.
