3.
OPERATION OF DIESEL GENERATING SET
3.7 Battery
a) The standard battery is maintenance free type, no need to add
any liquid.
b) During the operation, the generator can automatically charge
the battery.
c) If the generator is used for stand-by application, should remove
the battery.
d) If the voltage battery is too low, the generator will be difficult to
start. Please charge the battery by charger before starting the
generator.
NOTE 1: Do not start more than two machines in the same time,
Only start them one by one.
3.8 Control panel
There are two kind of control panels, LED3 and LED4 type:
LED3: This control panel has protection for the overload under
thermal breaker.
The LED display is giving information of the voltage, running hours,
frequency.
LED4: The main feature of this display is the protection of the
overload over the measurement of the current.
Once the display is receiving power will show the different
information of the generator performance.
By pressing the MODE key will display the information according
Voltage, current, Power and frequency
Protection settings: The LED4 display can settle different values
for the protection of the generator, default setting from factory can
be modified but is not recommentd to do.
3.9 Welding
process
Connect the welding cables to the generator
Be sure the cables are not cross
Select the desired intensity in the control panel.
Weld the desired parts.
Note:
DO NOT USE ELECTRODE WITH DIAMETER OVER 4mm.
Fig.21 LED3
Fig.22 LED4
22
Summary of Contents for DHY2500L/E
Page 31: ......
Page 32: ...MADE UNDER LICENSE OF HYUNDAI CORP SEOUL KOREA by ...
