ENG - 50
When traffic announcement is received, the TA indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the current mode) and begin broadcasting the announ
-
cement at TA volume level. After the traffic announcement is over, it will return to the previous
mode and volume level. When TA is turned on, SEEK, SCAN, AMS function can only be recei
-
ved or saved when traffic program identification (TP) code is received.
EON (Enhanced Other Networks)
When EON data is received, the EON indicator lights and the TA and AF functions are enhan
-
ced.
TA: Traffic information can be received from the current station or stations in other network.
AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio
to make fuller use of RDS information.
It constantly updates the AF list of preset stations, including the one that currently tuned into.
If you preset a station around the area at your home, you will later be able to receive the same
station at an alternative frequency, or any other station serving the same program, EON also
keeps track of locally available TP stations for quick reception.
PTY Reception (Program Type)
RDS FM stations provide a program type identification signal.
Example: news, rock, info, sport, etc.
PTY Mode: Press PTY to turn on the program type reception, the previous PTY type is shown.
Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then
use buttons 1 - 6 to select the desired program type. The selected PTY type is shown and sear
-
ching starts if no other function is selected for 2 seconds. If there is no corresponding program
type, NO PTY is shown and the unit will return to normal mode.
PTY Type Preset: Press PTY once to enter the MUSIC type or press PTY twice to enter the
SPEECH type. Then use function 1 - 6 to select the desired program type.
MENU FUNCTION
Press VOL knob more than 2 seconds to enter menu mode, then each press changes the mode
as follows:
TA mode -> MASK mode -> TA VOL mode -> RETUNE mode -> DSP mode -> ESP mode ->
MULT mode -> LOUD ON/OFF mode
-> BEEP ON/OFF -> SEEK1/2 mode(only in tuner mode) -> ST/MO mode(only in tuner mode)
-> LOCAL/DX mode(only in tuner mode) -> VOL mode -> 12/ 24 HOUR mode
TA mode
Rotate the knob to choose TA ALARM or TA SEEK mode. If the TA (traffic announcements) is
turned on and there is no traffic program identification code received in the specified time, no
TA/TP will display and either TA ALARM or TA SEEK will be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode: TA SEEK is automatically activated.