CADEX 12V “RAPID RC BATTERY TESTER” TOOL AND BATTERY WARRANTY POLICY
TSB #: 16-EE-001-1
Page 4 of 12
SUBJECT:
Service Procedure
:
Testing a Battery:
A. Connect the Battery Tester clamps
to the vehicle’s battery, making sure that the black clamp
is connected to the battery negative
“-” terminal and the red cable’s clamp is connected to the
battery positive “+” terminal. The Tester will warn if connected backwards.
NOTE:
Make sure vehicle ignition, interior and exterior lights are off for battery testing.
GOOD CONNECTION
BAD CONNECTION
Battery extension terminal
(-) Extension
(+) Extension
When testing the battery, connect the battery
tester to the battery terminal’s metal or battery
post firmly, not to the securing nuts. Otherwise the test result displayed on the battery tester
will be incorrect.
CAUTION
In some vehicles such as the Genesis Sedan, Equus, and Sonata HEV, the battery is located
in the trunk while there is an extension terminal located in the engine compartment. In this
case,
DO NOT
test battery using the extension terminal in the front. Always connect the
tester directly to the battery. Otherwise the result will not be correct.
CAUTION
