CADEX 12V “RAPID RC BATTERY TESTER” TOOL AND BATTERY WARRANTY POLICY
TSB #: 16-EE-001-1
Page 3 of 12
SUBJECT:
Tester Features
:
Top View:
Rear View:
Top View Diagram
:
1
The
Power
button. Press and hold to turn the tester on or off.
2
OK
Press to start tests, confirm settings, and select menu items.
3
▲
◄ ►
▼
Keypad direction keys. Press to scroll through menus, results, and settings.
4
ALT
Press to change the data entry mode to numbers/symbols, upper case letters, or lower case
letters. The indicator on the upper right of the screen shows which mode is currently active:
#
– Numbers and symbols
A
– Upper case letters
a
– Lower case letters
If the ALT key won’t toggle and the indicator stays in # mode, it means only numbers can be
entered on that screen.
5
The
Back
(or Escape) key. Press to exit menus and result screens (without saving any
changes). Press twice to show the internal battery level of the tester.
6
Keyboard
Use to enter data on certain screens.
7
Main Display
The LCD viewing panel
8
Printer
The embedded printer
9
These buttons have no effect; do not use them.
10
Battery Clamps
Connect these clamps to the battery terminals. The red clamp connects to the positive (+)
terminal and the black clamp to the negative (-) terminal.
11
Calibration Shunt
Use to calibrate the tester when it requests calibration.
Rear View Diagram:
1
Serial Port
Plug the supplied serial cable into this port to connect the tester to a computer.
2
Battery Clamp
Port
Connect the battery cable to this 15-pin port.
3
Input Power Port
Connect the external power supply here.
M A I N M E N U .
#
T e s t B a t t e r y .
S a v e d R e s u l t s
S y s t e m S e t t i n g s
V o l t s : 1 2 . 7 4 V
Tester internal
battery state
Tester charger
connected
Connected
battery voltage
Selection list
Screen name
Data entry
mode indicator
