26
ENGLISH
25
ENGLISH
Maintenance and storage
1.Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition;
2.Never store the equipment with petrol in the tank inside a building where
fumes can reach an open
fl
ame or spark;
3.Allow the engine to cool before storing in any enclosure;
4.To reduce the
fi
re hazard, keep the engine, silencer, battery compartment and
petrol storage area free of grass, leaves, or excessive grease;
5.Check the grass catcher frequently for wear or deterioration;
6.Replace worn or damaged parts for safety;
7.If the fuel tank has to be drained, this should be done outdoors.
ASSEMBLY
Assembling the handle
As shown in Fig 3 & Fig4
1.
Fasten the lower handle to
The device by using two bolts and
two small knobs on each side .
2.
Unfold the upper handle and
fi
x it to lower handle
by using the big knobs and the bolts on each side.
NOTE:
Make sure the rope guide is on the
right handle, when you stand behind the
mower.
Assembling the grass bag
As shown in Fig 6
1.
Clip the plastic clips over the metal frame.
Make sure that these clips are fully secured
to the metal frame.
Assembling the grass bag onto the mower
As shown in Fig 7
1.
Lift the rear discharge cover with one hand and
hook in the grass bag.
2.
Release the rear discharge cover to secure the
grass bag in position
Assembling the mulching plug
As shown in Fig 8
1.
Remove the grass bag
2.
Push the plastic mulching plug
into the discharge chute
until it is locked in place.
3.
Then release the flap, it will close
Back to cover the mulching plug.
Tidy the connection cord
As shown in Fig 5
Fix the connection cord to the handle
With the cord clip .(supplied)
06
07
Fig 6
Fig 7
Fig
3
Fig 8
Fig
4
Fig 5